How to Fit the JP COM’ALONG HALTER™

HOW TO FIT THE JP COM’ALONG HALTER™

  1. When haltering, either slip the crown piece over the head or open it and flip it over the head from the right side. The JP Com’Along Halter has a “Easy Flip” feature that facilitate that maneuver.
  2. Adjust the cheeks pieces so the noseband is approximately 2 fingers below the Zygomatic bone.
  3. Lower the 2 side tabs on the crown piece so they are close to the side buckles.
  4. Adjust the throat latch so the Vagal Trigger is well centered in the horse’s gullet. Buckle it tight so the crown piece stays low on the neck (C2/C3 area).
  5. Pull down the rope loop through the side tabs and every other passage, starting on the right side of the head so it lays snug around the head. The center/ attachment ring under the chin will hang 1 to 3 inches under the horse, depending on head size. The noseband part of the halter is never tight.
  6. Attach the lead line to the center ring and start educating your horse.

 

Back to blog